VC Assemblies For Severe Clutch Or Brake

VC Assemblies For Severe Clutch Or Brake

VC Clutch and Brake assemblies are designed and manufactured for harsh clutch or brake applications, where high inertia loads and constant slip often result in loss of torque and shortened service life. The design and construction of the VC differ from the CB Clutch and Brake in that torque is...

Send InquiryChat Now
Product Details

VC Clutch and Brake assemblies are designed and manufactured for harsh clutch or brake applications, where high inertia loads and constant slip often result in loss of torque and shortened service life.

The design and construction of the VC differ from the CB Clutch and Brake in that torque is transmitted through the torque rod rather than the sidewall of the actuating air tube. The loosely actuated air tube is contained within the housing formed by the edges and the two side panels and is replaceable. The torque rod held in place by the side plate passes through the cavity in the back plate of the friction block. Pressurizing the actuating air tube forces the friction tile into engagement with the cylindrical drum. When the operating tube pressure is released, the spring plate in the torque rod cavity of the back plate retracts the friction shoes. The component torque capacity depends on the applied pressure and speed. Catalog rating is given at 75 psi (5.2 bar) and zero speed. The maximum recommended pressure is 125 psi (8,6 bar). Pressure and speed adjustments are explained under the selection procedure.

Model:

Narrow: 11.5VC500, 14VC500, 16VC600, 20VC600, 24VC650, 28VC650, 33VC650, 35VC650, 37VC650, 42VC650

Width:12VC1000, 14VC1000, 16VC1000, 20VC1000, 24VC1000, 28VC1000, 32VC1000, 38VC1200, 42VC1200, 46VC1200, 52VC1200, 51VC1600, 60VC1600, 66VC1600, 76VC1600 and 76VC2000

Mobile Phone: +8615225937727

Skype: live:826113521

Facebook: www.facebook.com/Songlianjun

Email: damn@hndl.net.cn

Hot Tags: vc assemblies for severe clutch or brake, China, factory, cheap, price
Related Products
Inquiry